Infection Control

Steam System Consulting.

Steam Quality Testing

Training

Troubleshoting

Hospitals depend on sterile instruments. Wet steam can cause wet packs. We can help you eliminate wet packs… by eliminating wet steam.

Regulators and valves last longer when handling clean, dry steam. Ask for our articles on steam quality, or about a training class at your facility.

Articles

We are:

  • SBA – WBE – Woman Owned Business Enterprise
  • An SBA Small Business – NAICS Industry 541330 – Engineering Services
  • US SAM DUNS number 790978204
  • Professional Partner IAHCSMM

Thermo Diagnostics

Healthcare Steam Quality And Infection Control

What is the significance of steam quality to infection control?

According to the CDC Guideline for the Prevention of Surgical Site Infections: “Inadequate sterilization of surgical instruments has resulted in SSI outbreaks. Surgical instruments can be sterilized by steam under pressure, dry heat, ethylene oxide or other approved methods. The importance of routinely monitoring the quality of sterilization procedures has been established.” (1)

Steam under pressure is the primary way to sterilize critical items. The CDC Guideline for Disinfection and Sterilization in Healthcare Facilities states:

“Critical items confer a high risk for infection if they are contaminated with any microorganism. Thus, objects that enter sterile tissue or the vascular system must be sterile because any microbial contamination could transmit disease. This category includes surgical instruments, cardiac and urinary catheters, implants, and ultrasound probes used in sterile body cavities. Most of the items in this category should be purchased as sterile or be sterilized with steam if possible.” (2)

“Wet packs represent an economic loss to the institution because goods must be reprocessed. Unrecognized, they are a hazard to the patient.”

STERIS Corporation is one of the largest manufacturers of healthcare steam sterilization equipment. According to STERIS: “Perhaps the most frustrating and confounding dilemma that we face using steam sterilization is the occurrence of wet packs… Wet packs represent an economic loss to the institution because goods must be reprocessed. Unrecognized, they are a hazard to the patient. (3)

At the start of the working group sessions to revise the AAMI Steam Sterilization Standard it was written by the group leader:

“This effort is important on several levels. The CS/SP/OR Department represents about 5% of the steam used in hospitals but the steam quality connected to the sterilizers is mission critical for the production of sterile items for patient use… about 60% of the steam quality issues (wet packs) can be traced to the steam supplied to the sterilizers. The quality can vary during the work day. The remaining portions are the sterilizer performance and improper wrapping or loading. In my surveys, I find 90% of all CS/SP/OR Departments have experienced wet packs. We all know how frustrating and time consuming solving wet packs issues can be.” (4)

This is anecdotal, but the view that steam is a mysterious and troublesome way to sterilize is shared by leaders in the field, manufacturers, and standard writers.

(1) Mangram, A., et al.: “Guideline for Prevention of Surgical Site Infection, 1999. Hospital Infection Control Practices Advisory Committee,” Infection Control and Hospital Epidemiology. 20(4):250-278, April 1999.
(2) Disinfection and Sterilization in Healthcare Facilities, CDC
(3) Preparing instruments, utensils and textiles for sterilization and wet pack solving, STERIS Inc. 2003.
(4) Moore, Chip, Memo to AAMI ST-79 Steam Quality Working Group, 2009

Thermo Diagnostics

Sterilizer Wet Pack Articles

Read some of our articles about sterilizer wet packs, stains, and steam quality:

What is steam quality and why is it important to the CS Department? The September 2008 issue of OR Today shows how steam is consumed by heating instruments and converted to liquid water. Read More

Healthcare Purchasing News- The December 2013 issue reviews troubleshooting steps to take when stains occur on instruments after steam sterilization. Read More

June 2007 issue of Materials Management in Healthcare – features questions and answers about steam quality, wet packs, and specks. Read More

On Site Testing And Troubleshooting

You rely on the steam system to deliver thermal energy that is clean, dry and sterile…

We solve problems with sterilizers, autoclaves, wet loads and staining. We do steam quality testing according to ANSI/AAMI ST79, Comprehensive guide to steam sterilization and sterility assurance in health care facilities (2010), and European Standard EN285. The Steam Quality Test procedure develops data on the dryness, purity and stability of the steam supply. What makes us different is we ALSO test the boiler piping, valves, insulation and water supply that can impact steam quality.

You rely on the steam system to deliver thermal energy that is clean, dry and sterile……how do you figure out what’s causing the problems? That’s our job.

Independent, Confidential, Experienced

We are not affiliated with any sterilizer or humidifier manufacturer. Our audit staff average 30 years experience with steam in hospitals and life sciences.